[Solved] How do I make a Slider Bar to control sound?

How do i make a Slider Bar to activate/deactivate sound, or more advanced: sensibily control sound percentage? Thanks in advance!

The slide bar will have it minimum and maximum values set by you, and the sound volume has 0 as original sound, positive volume amounts will increase the volume and negative will decrease.

Just create and event to every tick, or every time the user change the bar values the value of the sound volume to be set as the value of the bar.

In addition to that, you can create a condition that if the value of the bar is equal to it's minimum then the sound should be muted

This is very complicated. Now, i will only made an simple Slider Bar with an range of 2 values. deathangel1479 , have you any idea? =/

Which is the value that define that the sound is muted?

There is no value for that. You can either set a extremely low value like -100 or set the sound to mute through event

Edit: Link removed, newer one a few posts further.

I beginn on 40, because all under is to silence, so you dont have halfe slider with unhearable.

But adjust how you want. You also can add more than one Audio Object.

deathangel1479 and RayKi thanks guys, this solved my problem!

Thanks again deathangel1479, your .capx is very usefull, fast to use and problem killer. Thank you very much!

deathangel1479 , I've modified the .capx, and added some features. Why the Local Storage isn't working?

Thats easy, because every tick is faster than the hole local storage get.

You set the local Storage, before you got it.

Set it later, for example: on slider value change.

deathangel1479 I've forgot to ask... :s

... how to get the Slider Bar value converted as percentage?

deathangel1479, I've set it to later, but continues don't working.

The get value need to int... Seem Storage give always a string.

I also added the correct math for percent.

volume2

deathangel1479, have a bug here. When i click in the "sound" icon (what make it mute), close and reopen the preview window, the value is the last than my action of clicking in button.

Here I'm using NW.js to test, and when the project loads, have a flash of 100%, and after, the saved value. Why is occurring this delay?

First problem solved, I edit it.

Second problem is a little tricky.

Thats because the value is set a few ms after the layer is shown.

Solutions:

1. You can solve this if you show/create the Objects first if the values are loaded.

2. You can hide it with for example a fader.

3. You can solve it with another layer before this one and load the Storage there and then go to the second layer(current).

But its only a example...

You also can add another var to set it after unmute to last value, and much other....